Join
As the next the single parts of our desirable body are joined. That is the sticking folds are coated with some liquid paste, and then are stuck together to the intended places. Pay attention with Join immediately on the fact that rough edges lie on top of each other shortly and dimension-exactly and fit to each other.
Only now the individual parts can be stuck together with each other. So the outside coat of our quadrangle pyramid with the ground and then the inside cylinder. Possibly you better manage if you stick together first the inside cylinder with the ground, and then both parts together in the outside coat face. Pay attention here particularly to the lines on the ground.
They must agree precisely with the lines on the cylinder, but the upper points in the cylinder with the upper corners of the outside coat do not fit. The body becomes skew, or then the ground does not fit angular to the outside coat.
After now the inside cylinder is introduced in the outside coat, fix best of all first with some paste the upper points with the corners of the outside coat. Moreover some patience is asked to bring together the points with the corners exactly and wait to the paste generated enough hold. Now you can begin with it the single segments of the round sticking fold carefully with a knife point or to bring inwards to similar aid, and to stick together piece around with paste.
Even if you stick together the ground with the outside coat, you should start to fix first with it the corners with paste.
Here it further goes along Stick
See also Alignment
Page 8 of 10
Here stands: Join
Join
Joining the single components of our desirable body requires patience and instinct.
First the single parts of our body are joined, the sticking folds straightened and in the necessary position brought.
Then only the individual parts are brought together and stuck together with each other. In addition the corners and points are aimed best of all first and are fixed.
