Stick
Worth knowing about the adherence: To stick is a manufacturing method from the main group of Add. Adherence is a material-logical adding has proceeded of the production engineering like welding and soldering. These become an Adding shares with the help of a paste material-conclusively with each other linkedly. By adhesion the paste sticks in the adding divides surfaces and connects thus the adding shares. By adherence you can nearly all materials join with each other and together.
The technical conversion of the adherence is demanding. The adhesive process must be controlled itself technically so well, that the result can leave. Above all the surfaces of the adding must be friendly to liability shares. For an optimum wetting the paste must be liquid during the adding process. Then the internal firmness (cohesion) of the paste there originates by physical tying processes or by chemical reaction.
Here stands: StickHere it further goes along Summary
Page 9 of 10
Stick
Our desirable body, " the quadrangle pyramid"skilful and precise join, so the single parts with each other close.
Begin to stick together at first the upper points and the lower corners precise. Pay attention to the fact which is properly aimed the body, besides. Every now and then it needs a little patience, until the paste generates enough strength and hold. Only if the body is properly aimed and is joined precise, stick together the sticking folds completely, in which you the liquid paste with a thin wood shaving in the sticking fold glide.
The many small segments of the parable-shaped sticking folds you bring with the help of a knife point or a similar aid carefully behind the inside cylinder and stick together this. As long as the paste is still liquid, you can still straighten very nicely the sticking fold and bring in his right form.