Winding up cut out

Cut out the printed out   winding up is now the next challenge to our talent.  Also while cutting out is  extreme care announced. To be able to cut very exactly on the external lines along, I recommend the single parts of the winding up  to cut out only roughly at first.  Now we begin with the individual parts of the winding up to cut out carefully. So one is able to do the scissors exactly on the external lines would drive down. Absolutely   pay attention to the fact which the stick folds are not cut off inadvertent with, we need this still around the single winding up parts to be able to stick together. The look for detail is asked here. Particularly with the stick folds have to do different small " little corners " are removed, so that later the corners do not overlap with the fold annoyingly or close even clean folds of the body edges!

Here stands: Winding up cut out

Here it further goes along Adhesive folds

Page 4 of 10

Winding up cut out

Importantly! Carefully cut out the winding up ! The look for detail is asked here!

The single parts are to be seen here already sorted. Left lie the ground, the inside cylinder and the outside coat of the outside body of our pyramid with penetration.
Of right are the parts of the inside part with the pyramid point; the pyramid point, the cylinder coat and the ground of the cylinder.